home
Core Sound, 405 Cedar Lane, Suite #1, Teaneck NJ 07666 USA — 888.538.6744 / 201.801.0812
    Home    |     Products    |     News     |     Services    |     Links    |     Contact Us    |     About Core Sound    
M-Audio's Fast Track Pro Specifications
Fast Track Pro Specifications

  • Mic Inputs (A/D)
    • Input Impedance 2.7k Ohms unbalanced, 5.4k Ohms balanced
    • Maximum Input Level from +24dBu @ min gain: pad on to -40dBu @ max gain, no pad
    • Channel-to-Channel Crosstalk: less than -110dB
    • SNR: -101dB, A-weighted
    • Dynamic Range: 101dB, A-weighted
    • THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
    • Frequency Response: 20Hz to 20kHz, +/- 0.1dB
    • Pre-amp Gain: greater than 40dB
    • Pad: -20dB pad
    • Indicators: Signal and Clip for each channel
    • Connectors: two combined XLR/TRS
  • S/PDIF Digital Audio I/O
    • Connectors: 2 RCA, one input and one output
    • Sample Rates: 44.1, 48, 88.2 and 96
    • Word width: 16 and 24 bits
  • Instrument Inputs (A/D)
    • Input Impedance: greater than 220k Ohm, unbalanced
    • Maximum Input Level: From +22dBV @ min gain, pad on to -42dBV @ max gain no pad
    • SNR: -100dB, A-weighted
    • Dynamic Range: 100dB, A-weighted
    • THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
    • Frequency Response: 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate
    • Pre-amp Gain: >40dB
    • Pad: -20dB pad
  • Line Inputs (A/D)
    • Input Impedance: 20k Ohms balanced and unbalanced
    • Maximum Input Level: +4.1dBu balanced, +1.9dBV unbalanced
    • Channel-to-Channel Crosstalk: less than -110dB
    • SNR: -101dB, A-weighted
    • Dynamic Range: 101dB, A-weighted
    • THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
    • Frequency Response: 20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate 20Hz to 40kHz, +/- 0.1dB @ 96kHz sample rate
    • Pad: -20dB pad
  • Input Inserts (analog)
    • Maximum Level Send: +6dBV, unbalanced
    • Maximum Level Return: +6dBV, unbalanced
    • THD+N: 0.00281% (-91dB) @ -1dB from max level, 1kHz
    • Frequency Response: 20Hz to 40kHz, +/- 0.1dB
  • Line Outputs (D/A)
    • Output Impedance: 150 Ohms unbalanced, 300 Ohms balanced
    • Maximum Output LevelL +1.8dBV, unbalanced +10.1dBu, balanced
    • Channel-to-Channel Crosstalk: less than -108dB
    • SNR: -103dB, A-weighted
    • Dynamic Range: 103dB, A-weighted
    • THD+N: 0.005% (-86dB) @ -1dBFS, 1kHz
    • Frequency Response: 20Hz to 20kHz, +/- 0.3dB @ 48kHz sample rate
  • Headphone Output (D/A)
    • Maximum Output: -2.5dBV at THD less than 0.05% into 32 ohms
    • Working Range: 32 to 600 ohms
  • I/O Bit Depth Sample Rate (kHz)
    • With Drivers: 4 x 4 16 44.1/48, 2 x 4 24 44.1/48, 2-in OR 2-out 24 88.2/96
    • USB class compliant: 2x4 16 44.1/48 (no drivers needed)
  • Low latency ASIO 2, WDM and Core Audio drivers
  • Power requirements: 9 VDC @ 500 mA, center pin positive
  • Size: TBD
  • Weight: TBD pounds
  • Next  

    For pre-sales consulting or to place an order, call Core Sound at 1.888.538.6744 or 1.201.801.0812.

    "Core Sound Microphones" is a trademark of Core Sound, LLC
    "Core Sound" is a trademark of Core Sound, LLC
    "OctoMic", "TetraMic", "HeadLine" and "2Phant" are trademarks of Core Sound, LLC
    Thanks to HK Audio for use of their open-air concert photo. Mossman photo ©2004 OceanBridge Communcations.
    All content of this website ©1990-2020 Core Sound, LLC
    Back to top Audio Engineering
    Society Member