home
Core Sound, 405 Cedar Lane, Suite #1, Teaneck NJ 07666 USA — 888.538.6744 / 201.801.0812
    Home    |     Products    |     News     |     Services    |     Links    |     Contact Us    |     About Core Sound    
Core Sound Mic2496 V2
Reconfiguring V2 Internal Jumpers for Phantom Power and Sample Rate

(Last updated 06/12/2008)

DISCLAIMER AND IMPORTANT NOTE

Do not attempt to reconfigure V2's internal jumpers unless you are willing to accept responsibility for possible damage you might cause in the process. That damage will not be covered under warranty.

If you misconfigure V2 so that 48 Volts is applied to the High End Binaural (HEB) microphone set, the HEBs will be destroyed!

If you have any doubts about your ability to follow these instructions correctly, please return V2 to Core Sound for re-configuration.

Instructions for Reconfiguring Mic2496's Internal Jumpers for Phantom and HEB Power

TO ENABLE P48V PHANTOM POWER AND DISABLE HEB POWER

TBD

TO DISABLE P48V PHANTOM POWER AND ENABLE HEB POWER

TBD

CONFIGURATION INFO FOR THE ORIGINAL MIC2496 V1

You can see the internal jumper configuration info for the original Mic2496 by clicking here.

Next  

Ordering

For pre-sales consulting or to place an order, call Core Sound at 1.888.538.6744 or 1.201.801.0812.

"Core Sound Microphones" is a trademark of Core Sound, LLC
"Core Sound" is a trademark of Core Sound, LLC
"PDAudio", "TetraMic", "HeadLine", "2Phant" and 4Mic are trademarks of Core Sound, LLC
Thanks to HK Audio for use of their open-air concert photo. Mossman photo ©2004 OceanBridge Communcations.
All content of this website ©1990-2017 Core Sound, LLC
Back to top Audio Engineering
Society Member