home
Core Sound, 405 Cedar Lane, Suite #1, Teaneck NJ 07666 USA — 888.538.6744 / 201.801.0812
    Home    |     Products    |     News     |     Services    |     Links    |     Contact Us    |     About Core Sound    
DPA 4006 Omnidirectional Microphone (48 Volt)
SPECIFICATIONS

Cartridge Type:
Pre-polarized condenser Br?el & Kj?r Type MM0042
Principle of operation:
Pressure
Frequency Range:
On-axis: 20Hz - 20kHz ?2dB up to 124dB peak
Cartridge lower limiting frequency (-3dB):
3 to 5Hz
Directional characteristics:
Omnidirectional
Phase response:
Phase matching between any two microphones: ?10?
Sensitivity:
Nominally 10mV/Pa; -40dB re. 1V/Pa unloaded (at 250Hz)
Equivalent noise level A-weighted:
Typ. 15dB(A) re. 20 ?Pa (max. 17dB(A))
Equivalent noise level CCIR 468-1:
Typ. 27dB (max. 29dB)
Maximum sound pressure level:
143dB SPL peak (f > 200Hz)
Total harmonic distortion:
129dB SPL peak (<0.5% THD)
135dB SPL peak (<1% THD)
Preamplifier frequency range:
20Hz to 40kHz ?1dB
Preamplifier output impedance:
<75 Ohm
Cable drive capability:
Up to 300m (984ft)
Microphone Length:
165mm (6.5in)
Microphone diameter:
19mm (0.75in)
Weight:
150g (5.29oz)
Accessories Included
Microphone Holders & Suspension Mounts
UA0639Microphone Clip
Acoustic Modification Accessories
DD0251Near-field Grid, Silver
DD0297Diffuse-field Grid, Black
Windscreens
UA0638Windscreen for ?16mm (0.63in) Microphone

Accessories Available
Microphone Holders for Musical Instruments
MB4000Magnet Base
Shock Mounts
RSM4000Shock Mount for Windjammer
UA0897Shock Mount
Shock Mount Rubbers
DDS0731Rubber Mount 19mm (0.75in), Medium Soft
Microphone Holders & Suspension Mounts
UA0961Microphone Holder
Stereo Accessories
UA0836Stereo Boom with Holders
UA0837Stereo Boom excluding Holders
Floor & Table Stands
TB4000Table Base
Acoustic Modification Accessories
APE/A>Acoustic Modification Kit, Mono
APE/A>Acoustic Modification Kit, Stereo
L110CAcoustic Pressure Equaliser, 110mm (4.33in) Cylinder
L30BAcoustic Pressure Equaliser, 30mm (1.18in) Ball
L40BAcoustic Pressure Equaliser, 40mm (1.57in) Ball
L50BAcoustic Pressure Equaliser, 50mm (1.97in) Ball
UA0777Nose Cone
Windscreens
DUA0090Pop-filter
Connection Adapters
HTP4000Converter: 130V to P48
Cables
AO0182P48 Microphone Cable, 5m (16.4ft)


Next  

For pre-sales consulting or to place an order, call Core Sound at 1.888.538.6744 or 1.201.801.0812.

"Core Sound Microphones" is a trademark of Core Sound, LLC
"Core Sound" is a trademark of Core Sound, LLC
"PDAudio", "TetraMic", "HeadLine", "2Phant" and 4Mic are trademarks of Core Sound, LLC
Thanks to HK Audio for use of their open-air concert photo. Mossman photo ©2004 OceanBridge Communcations.
All content of this website ©1990-2018 Core Sound, LLC
Back to top Audio Engineering
Society Member