home
Core Sound, 405 Cedar Lane, Suite #1, Teaneck NJ 07666 USA — 888.538.6744 / 201.801.0812
    Home    |     Products    |     News     |     Services    |     Links    |     Contact Us    |     About Core Sound    
Core Sound Binaural microphone set
RECORDING AND CARE TIPS

When recording loud sound sources with your CSB microphones we recommend using your recorder's low sensitivity (-20 dB) setting. When recording extremely loud sound sources, either use an external attenuator cable (available from Core Sound) or use your recorder's line level inputs.

To prolong battery life, disconnect the microphones from the battery box when not in use.

Do not apply 48 Volt phantom power to the CSB microphones. Doing so may damage or destroy them.

Avoid installations that would abrade or cut the cable. Do not clip the microphones to their cable and do not severely bend the cables at the points where they enter the microphone cartridge shells.

The cable can be wiped clean with a damp cloth.

Next  

Ordering

All Core Sound microphones:

For pre-sales consulting or to place an order, call Core Sound at 1.888.538.6744 or 1.201.801.0812.

"Core Sound Microphones" is a trademark of Core Sound, LLC
"Core Sound" is a trademark of Core Sound, LLC
"PDAudio", "TetraMic", "HeadLine", "2Phant" and 4Mic are trademarks of Core Sound, LLC
Thanks to HK Audio for use of their open-air concert photo. Mossman photo ©2004 OceanBridge Communcations.
All content of this website ©1990-2017 Core Sound, LLC
Back to top Audio Engineering
Society Member